Managed Industrial Ethernet Switch User Manual
3onedata proprietary and confidential 44
Copyright © 3onedata Co., Ltd.
Enter “1” in the “ID” textbox of “Group1”.
Step 5
Set “Port 1” as “01” and “Port 2” as “02” separately.
Step 6
Note:
“Port 1” and “Port 2” cannot be set to the same port.
For Device 100 and 101, choose “Slave” in the drop-down list of “Master-slave” of
Step 7
“Group 1”.
For Device 102, choose “Master” in the drop-down list of “Master-slave” of “Group 1”.
Step 8
Click “Apply”. Enter “Main Menu > System Management > Device Address”.
Step 9
In the area of “reboot the device”, click “reboot”.
Step 10
End.
Step 11
6.1.2 Instance: create coupling ring
Coupling ring could be created when the redundant protocol is “Ring V2” and “Ring
V3”. Here we take creating coupling ring in Ring V3 for example.
When using Ring V2 to create coupling ring:
“Port 1” represents “coupling port”, no control port.
The creation process of coupling ring is same as that of Ring V3.
