IES6300TSN-8GT2GS-2LV
Managed Industrial Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【
Package Checklist
】
Please check the integrity of package and accessories while
first using the switch.
1 Industrial Ethernet switch
2. DIN-Rail mounting attachment
3. Certification
4. Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
This product is Gigabit managed DIN-Rail industrial Ethernet
switch. The model is: IES6300TSN-8GT2GS-2LV (8 Gigabit
PoE Copper Ports + 2 Gigabit SFP Slots, 9~60VDC redundant
power supply input).
【
Panel Design
】
Top view, bottom view and rear view
Front view and Side view
1.
Power P1 input terminal (P1)
2.
Power P2 input terminal (P2)
3.
Terminal blocks for relay alarm output (RELAY)
4.
DIP switch
5.
CONSOLE port
6.
Grounding screw
7.
Wall-mounting location hole
8.
DIN-Rail mounting kit
9.
Power supply indicator (P1-P2)
10.
Alarm indicator (ALM)
11.
Running indicator (RUN)
12.
TF card slot (TF, reserved)
13.
1000Base-X Gigabit SFP (GE 9-10)
14.
Interface indicator (GE 1-10)
15.
10/100/1000Base-T(X) Gigabit copper port (GE
1-8)
【
Mounting Dimension
】
Unit: mm
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
DIN-Rail Mounting
】
The product adopts 35mm standard DIN-Rail mounting which
is suitable for most industrial scenes, mounting steps as
follows:
