IES6320 Series
Managed Industrial Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District,
Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【
Package Checklist
】
Please check the integrity of package and accessories while
first using the switch.
1. Industrial Ethernet switch
2. Certification
3. Warranty card
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
This series of product is Gigabit managed DIN-Rail industrial
Ethernet switch. Models as follows:
Model I. IES6320-16GT-2P48 (16 Gigabit copper ports)
Model II. IES6320-16GT4GS-2P48 (16 Gigabit copper ports
+ 4 SFP slots)
【
Panel Design
】
Top view, bottom view and rear view
Front View
1.
Grounding screw
2.
Relay alarm output terminal block
3.
Console port
4.
Terminal block for power input
5.
DIP switch
6.
DIN-Rail mounting kit
7.
Device running indicator RUN
8.
Power input status indicator P1/P2
9.
Relay alarm indicator ALM
10.
10/100/1000Base-T(X) Gigabit Ethernet Interface
11.
Ethernet port link indicator
12.
1000Base-X Gigabit Ethernet SFP slot
【
Mounting Dimension
】
Unit: mm
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
DIN-Rail Mounting
】
The product adopts 35mm standard DIN-Rail mounting which
is suitable for most industrial scenes, mounting steps as
follows:
Check if the DIN-Rail mounting kit is installed firmly.
Step 1
Insert the bottom of DIN-Rail mounting kit (one side
Step 2
with spring support) into DIN-Rail, and then insert
