background image

- 1 - 

 

 

 

 

 

 

IES7120-4GS Series 

Industrial Ethernet Switch 

User Manual 

 

 

 

 

 

 

 

 

 

 

 

 

 

Shenzhen 3onedata Technology Co., Ltd. 

Tel: +86-755-26702668  Fax: +86-755-26703485 

www.3onedata.com

 

Summarize

 

IES7120-4GS  series is  an  industrial grade, managed and 

redundancy Ethernet switch.  The  IES7120-4GS  industrial 

Ethernet switch consists of 16 Ethernet ports and 4 gigabit ports. 

The IES7120-4GS-2F consists of 14 Ethernet ports, 2 Fiber ports 

and 4 gigabit ports. The IES7120-4GS-4F consists of 12 Ethernet 

ports, 4 Fiber ports and 4 gigabit ports that provide an economical 

solution for your industrial Ethernet connection.  It supports auto 

flow control, full/half duplex mode and MDI/MDI-X 

self-adaption. The switch support AC power input series and DC 

power input series optional. 

SW-Ring

TM

  is designed as rapid  redundancy network 

arithmetic. It provided recover technology for fault of rapid 

redundant network, the recovery time<20ms. Product accorded to 

CE, FCC standard and Industry grade 4 design requirement, 

support 1 channel AC power input or 2 channel DC power input 

and 1 channel relay alarm output, and -40

75

  working 

temperature,  can meet all kinds of Industrial environment 

requirement. It can use in power, water conservancy, 

transportation area etc.

 

Packing list

 

The industrial Ethernet switch is shipped with the following items. 

If any of these items are missing or damaged, please contact your 

customer service representative for assistance. 

 

Industrial Ethernet switch 

  1 

 

Documentation and software CD 

  1 

 

User manual 

  1 

 

DIN-Rail mounting kit 

  1 

 

Warranty card 

  1 

Feature

 

High performance network exchange technology 

 

Support IEEE802.3, IEEE802.3u, IEEE 802.3x, IEEE802.3z, 

IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W 

 

SW-Ring ring network patent technology (Fault recovery 

time<20ms

 

 

Support RSTP, way exchange time<50ms 

 

Support WEB configuration 

 

Support Port based VLAN and IEEE 802.1Q VLAN   

 

Support absolutely and opposite priority, support 

IEEE802.1P, DSCP priority   

 

Store and Forward switching process type 

 

Support port status display, data update.

 

 

Support MAC address auto-learning, auto-aging   

 

Support 8K MAC address 

 

Support 12.8Gbps backboard bandwidth 

 

DC power input series support redundancy power 

supply(12

48VDC) 

 

AC power input series support AC power supply(100

240VAC/DC) 

 

Support 1 channel relay alarm output 

Reliable Industrial grade design 

 

Industrial grade 4 design, -40-75

work temperature 

 

No fan deign 

 

IP40 protection grade 

 

DIN-Rail mount 

Panel layout

 

Rear view                Vertical view and bottom view 

 

Summary of Contents for IES7120-4GS Series






Reviews: