The default IP address of the device is “192.168.1.254”.
The default username and password of the device is
“admin”.
If the username or password is lost, user can restore it
to factory settings via device DIP switch or
management software; all modified configurations will
be cleared after restoring to factory settings, so please
backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
Gigabit SFP
1000Base-SFP, SFP slot
10/100/1000Base-T(X)
10/100/1000Base-T(X)
self-adapting RJ45 port, full/half
duplex self-adapting or
specified operating mode,
support MDI/MDI-X
self-adapting
Console port
CLI command management
port (RS-232), RJ45
Alarm interface
2-pin 7.62mm pitch terminal
blocks, support 1 channel relay
alarm information output
Indicator
Power supply indicator, running
indicator, interface indicator and
alarm indicator
Exchange attributes
Backplane bandwidth
56G
Packet buffer size
12Mbit
MAC table size
16K
Power supply
Input power supply
This series support 12~48VDC
power supply, dual power
supply redundancy, nonpolarity
and anti-reverse connection.
Access terminal
4-pin 7.62mm pitch terminal
blocks
Consumption
IES7120G-4GS
No-load consumption:
11.04W@48VDC
Full-load consumption:
14.88W@48VDC
IES7120G-16GT
No-load consumption:
11.04W@48VDC
Full-load consumption:
13.68W@48VDC
Working environment
Working temperature
-40~75
℃
Storage temperature
-40~85
℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)
