CLI user manual
24
www.3onedata.com
Chapter 7 Static Multicast filtering view
7.1 Enter the multicast filtering view
Static multicast configuration includes:
1. Add static multicast address;
2. Delete the multicast address;
3. Display the multicast address;
Table 7.1.1 into the static multicast view command:
Operating
Command
Description
In view of the configuration of
multicast filtering
Multicast
To perform the operation in the system.
7.2 Add /Delete static multicast address
User can use the following commands to add/delete static multicast address.
Multicast address add/delete command:
Operating
Command
Description
Add multicast
address
Add
<macaddress>
<portlist>
<macaddress>: multicast address, format is
XY-XX-XX-XX-XX-XX, X is any hex number
<portlist>: Port 1,2,3-10 or all
Delete
multicast
address
Delete
<macaddress>
Example:
Add multicast address 01-22-33-44-55-66, its port members are Port 1, 2, 3.
Multicast_filters#
add 01-22-33-44-55-66 1,2,3
MAC: 01-22-33-44-55-66 Port: 1,2,3
[OK]
7.3 Configuration of showing static multicast address
User can use the following commands to check static multicast address.
Table 7.3.1
Shows static multicast address command:
Operating
Command
Description
Show static multicast
filtrated address
Show multicast
Run in view of multicast
Switch(Multicast)#
Show multicast
（
1
）
MAC: 01-22-33-44-55-66 Port: 1, 2, 3
