CLI user manual
32
www.3onedata.com
Chapter 10 Trunk configuration
10.1 Enter the port Trunk view
Port Trunk configuration includes:
1. Port trunk configuration;
2. Delete port information fusion;
3. Port trunk information view;
Table 10.1.1 to enter the port trunk view:
Operating
Command
Description
Enter the port trunk configuration view
trunk
To perform the operation in the
system.
10.2 Port trunk configuration / delete
The user can use the following command to configure / delete the port trunking
Table 10.2.1 trunking configuration / delete command:
Operating
Command
Description
Configuration
trunk
Config
{1|2|3|4}
<portlist>
{1|2|3|4}: 1, 2, 3, 4 respectively mean trunk group1, 2,
3, 4
<portlist>:trunk port 1,2,3-10 or all
Delete trunk
Clean
<trunkgroup>
<trunkgroup>:
1, 2, 3, 4 respectively mean trunk group1, 2,
3, 4
all:All trunk group
Example: set the port 1, 2 for the trunk group 1
Switch
（
Trunk
）
#
config 1 1,2
[OK]
10.3 Display port trunk configuration information
The user can use the following command to view port trunk configuration information.
Table 10.3.1 view port trunk configuration command:
Operating
Command
Description
Display
port trunk
configuration information
Show
<trunkgroup>
<trunkgroup>:
1, 2, 3, 4 respectively mean trunk group1, 2,
3, 4
all:All trunk group
