Click
“OK” button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is “192.168.1.254”.
The default username and password of the device is
“admin”.
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
Gigabit SFP
1000Base-SFP, SFP slot
POE pins
V+, V+, V-, V- are corresponding
to the Pin 1, 2, 3, 6
Gigabit copper port
10/100/1000Base-T(X)
self-adaptive
RJ45,
full/half
duplex mode or forced work
mode,
support
MDI/MDI-X
self-adaption
Console port
CLI command management port
(RS-232), RJ45
Alarm interface
2-pin 7.62mm pitch terminal
blocks, support 1 channel relay
alarm information output
Indicator
Power indicator, running
indicator, interface indicator,
PoE indicator and alarm
indicator
Exchange attributes
Backplane bandwidth
24G
Packet buffer size
4Mbit
MAC table size
8K
Power supply
Input power supply
DC power supply product Input
48VDC
Support DC dual power supply
redundancy, anti-reverse
connection
Support built-in overcurrent
protection
Access terminal
4-pin 7.62mm pitch terminal
blocks
Consumption
No-load
7.30W@48VDC
Full-load
103.49W@48VDC
Environmental limits
Working temperature
-40
℃
~70
℃
Storage temperature
-40
℃
~85
℃
Working humidity
5%~95% (no condensation)
Protection grade
IP40 (metal shell)
