User manual
31
5.10.1 User password
Enterprise usually required two different person to monitor device and manage system/ network. The authority
need to separate. Monitor person was in charge of monitor work, system/network person was in charge of
system/work management. The switch provided
classification management:
Administrator authority and
Observer authority. Observer just had authority to check the status of switch. Administrator had the authority to
configure the parameters of the switch.
Index
User index indicates which group of users. There are three user indexes in drop-down list.
Access level:
administrator: have the right to check and configure all settings
observer: have the right to check all settings merely
Login name
The identity of visitor with the letter combination is no more than 16 bytes
Password:
Visitor use password, user authority allows the letter combination no more than 16 bytes
Confirm password
Make sure the last time input password is correct.
1. User must remember user name and password after modified. If forget it, please use DIP switch to make default factory.
The default user name and password: admin12345.
2. Set same user mane, the front settings of user name/password will be available.
5.10.3 DHCP Server
The DHCP Server function is enabled, is to use this equipment as a DHCP server, by setting the static address
table realization, this equipment is able to assign IP addresses to other devices connected to this equipment. For
