Powered by
www.3sense.tech
Nov. 2018
This device is part of 3Sense product family
2. Mounting Guidelines
To properly mount the system, please consider the instructions and suggestions given in the
following chapters. Plan all wiring before installing your GPS-TS. Also consider the cabinet space,
enclosure dimensions and rated environmental conditions. Use good wiring practices to minimize
problems that may occur due to electrical interference.
Every device is already programmed before delivery with all its functionalities, so it’s ready to
mount.
2.1. Environmental Considerations
IP66. No ingress of dust; complete protection against contact (dust tight). No ingress of water
when submerged up to a depth of 1 meter for 30 minutes. Suitable for outdoor use.
Operational Temperature Range: -20°C ~ +60°C*
* Please pay a full attention that vehicle shall NOT be left under direct sunlight long time in hot
weather. There is a risk of battery explosion in hot temperature.
NOTE: Locate GPS-TS away from AC power/motor wiring and sources of direct heat output
such as transformers, heaters, large capacity resistors, or shock and vibration sources. Avoid
using the device in areas where chemicals or flammable gases are present to minimize any
risk of ignition.
