Powered by
www.3sense.tech
Nov. 2018
This device is part of 3Sense product family
Connect Pro-E 4.0 to a Wi-Fi® network
Only after engaging to said network,
a page identified with the IP address:
192.168.4.1 (whose
interface is shown below), can be displayed:
To set the SSID of the network to which the device will be connected, its Password; as well as
the URL and Port that will receive the transmitted data, proceed as follows:
1. On the Home Page, press the Configure Wi-Fi®
button to be directed to a page where you
can see a scan of Wi-Fi® networks detected by the device as available, 2 input fields, and
two buttons (Save and Scan).
The page that loads after selecting Sensor Settings, on Home Page, is presented in the
following image:
