9
Stunt Scooter Instructions & Care Guide
Deck, Handles & Clamp Cleaning
It is suggested to disassemble and clean this area of the
scooter every 6 months, being sure to remove any dirt
or grime that has built up from use.
Handlebar Alignment
Always check the handles are firmly tightened to the deck
via the clamp. If the front steering bar is not fixed tightly,
you can use an Allen Key and Wrench to tighten the bolt.
Use firm pressure but avoid overtightening.
Wheels, Bearings and Brake
The wheels, wheel bearings and brakes may become worn out
after regular use but can be purchased from our website
and easily changed.
Simply remove the axle bolts with two Allen Keys and
slide the wheel off its fork, replace with a new wheel or
replace wheel bearings, then reattach the wheel.
Cleaning
If you wish to clean your scooter, wipe with a damp cloth
to remove dirt and dust.
Do not use alcohol or ammonia
based cleaners or solvents as they may damage the
surfaces, dissolve some components or soften the
decals / adhesive.
Scooter Maintenance
