background image

To  start with,  we’d  like  to  provide  you  with  some  important  information 

about your new bicycle. This will help you make the most of its benefits 

and avoid any possible risks. Please read this instruction manual carefully 

and keep it for your future reference.
Your bicycle has been handed over to you fully assembled and adjusted. 

If this is not the case, please contact your specialist retailer to ensure that 

this important work is completed or make sure you carefully read the en-

closed assembly instructions and follow all the directions given.
It is assumed that users of this product have a basic and sufficient knowl-

edge of how to use bicycles.
Everyone that:
•  uses
•  repairs or services
•  cleans
•  or disposes of
this bicycle has to understand and take note of the content and purpose of 

this operating manual. If you have any further questions or have not quite 

understood certain points, you should contact a specialist bicycle retailer 

for your own safety.
All information contained in this operating manual relates to the design, 

technology as well as care and maintenance of your bicycle. Please take 

note of this information, as much of it is relevant to safety. Failure to con-

sider this information can cause accidents, falls and damage to property.
As modern bicycle technology is highly complex, we have chosen to only 

describe the most important points. 
In addition, this operating manual only applies to the bicycle with which it 

was supplied.
For  more  specific  technical  details,  please  refer  to  the  enclosed 

notes  and  instructions  from  the  respective  manufacturers  of  the 

individual components used on the bicycle. If you are unsure about 

a particular point, please contact your specialist retailer.
Before  riding  your  bicycle  on  public  roads,  you  should  inform  yourself 

about the applicable national regulations in your specific country.

Firstly, here are a few important pointers as to the rider’s person which 

are also very important:
•  Always wear a suitable bicycle helmet adjusted to fit 

your head and wear it for every ride!

•  Read the instructions supplied by your helmet manu-

facturer relating to fitting the helmet properly.

•  Always wear bright clothing or sportswear with reflec-

tive elements when you ride. If you are riding in dif-

ficult terrain, please wear suitable protective clothing, 

e.g. body protectors. This is vital so that other people 

can SEE YOU.

•  Always wear tight clothing on your lower body, and trouser clips if re-

quired. Your shoes should be grippy and have stiff soles.

Even if you are an experienced bicycle user, please take the time to first 

read the chapter “Before your first ride” and then carry out all the impor-

tant checks from the chapter “Before each ride”!
Please note that as a bike rider, you are particularly at risk on public roads.
Ensure  that  you  protect  yourself  and  others  with  responsible  and  safe 

riding!

Dear Customer,

C2

Summary of Contents for Strada









































Reviews: