15
Hipster KOBRA
Rev.100316-02
7. Installation instructions
ALL ELECTRICAL
WORK MUST BE
PERFORMED
BY AN AUTHORIZED
ELECTRICIAN
7.1 Description
Spirit-level
Adjustable spanner
Hex key 4 mm
2,5 mm
Drilling machine, Drill
Screwdriver
Marker pen
Hole saw
1.
Make sure the surface is horizontal.
4.
Attach provided silicone between A
and the counter top. Apply the silicone
throughout the area of the flange. This is to
prevent water leakage into the HeatCase.
Tighten the screws.
A
and
B
together.
Note!
The drilling template is extra material in
the manual.
7.2 Installation
3.
Drill the holes on the surface to assemble
the KOBRA.
Caution!
Make sure the KOBRA is in
level, or it will not extract evenly in
the filter basket. Use a spirit-level .
Tools needed:
2.
Use the drilling template to place the
KOBRA accordingly.
A
B
95mm
Min 41mm
39mm
19,5mm
34mm
Min
6m
m
Max
8m
m
34mm
Make sure to print this in scale 1:1 (100%)
Drilling template
KOBRA
Example
SILICONE
Caution!
Summary of Contents for Hipster KOBRA
Page 1: ...Rev 100316 02 Made in Sweden KOBRA 200001 User manual Hipster KOBRA...
Page 2: ...2 Rev 100316 02 Hipster KOBRA...
Page 4: ...4 Rev 100316 02 Hipster KOBRA...
Page 13: ...13 Hipster KOBRA Rev 100316 02 5 2 Wiring diagram HeatCase 220 240 VAC 2400W...