background image

110i R2 / 110i R2 CS Engine Manual

Important!

For your safety and for the safety of those around you -- also to learn what is required to maintain your warranty -
we strongly advise you to read this entire manual carefully BEFORE you start using the engine.
Safe Operation and 3W's Conditional Warranty

For safe operation and to maintain your warranty you must:

Have a properly designed engine box on your model

Mount the engine correctly

Provide adequate air flow and cooling for the engine

Provide adequate air flow and cooling for the exhaust

Use an approved propeller and spinner

Drill the propeller correctly

Balance the propeller correctly

Tighten the propeller bolts correctly and check them regularly

Properly mount your ignition to avoid overheating

Use the correct battery and regulator (if applicable) for your ignition

Use the correct switch for your ignition

Use an appropriate fuel tank, plumbing lines, and installation

Use the appropriate fuel for break in and after break in (gas and oil)

Insure adequate filtering of your fuel

Maintain your engine properly, keeping it clean, etc.

Use a pre-flight check list before flying your model

Secure your model properly when starting

Not use your fingers or hand to start your model

Adjust your carburetor correctly

Not adjust your carburetor while the engine is running

Insure that your spark plug is in good condition and is secured correctly

Insure that your ignition wires are not frayed and are protected

Insure that your ignition cap is securely mounted

Keep all people behind the line of the prop

Do not put anything (i.e., fingers, body parts, objects, et al) into the rotating propeller

Keep children away. All spectators should be kept a safe distance away from the running engine.

Wear proper apparel. Do not wear loose clothing, gloves, neckties, jewelry, or neck straps for your radio

which may get caught in the moving propeller.

Always wear eye protection when starting the engine.

Do not operate this engine if you are under the influence of any drugs, alcohol or medication that could affect
your ability to use the engine properly.

Disclaimer

We cannot control how safely our products will be used. And, therefore we do not accept any responsibility for
damage, or injury from their usage.

www.3w-modellmotoren.com

Summary of Contents for 110i R2




















Reviews: