background image

 

 

Sales@4-Max.co.uk 

www.4-Max.co.uk

 

Tel: 01256 782 512 

 

Many thanks for purchasing the 4-Max Inspiration F3A 50E Kit from 4-Max Models.  
We hope you enjoy your new model. 

 

At 4-Max Models, we like to offer competitive prices, good performance, and products that you 
can setup and use with ease. That’s why we have extensively researched and tested this 
airplane and suggested all the products necessary for you to have a great performing aircraft. 

 

By purchasing and/or building this model, the user assumes ALL liability and risk involved with 
this product. This model should be built and flown by an experienced builder and R/C Flyer. 

  

4-Max Models guarantees this model to be free of defects at the date of purchase. This 

warranty does not cover any parts damaged by use, modification or crash damage.  
In no way shall 4-Max Models’ liability exceed the original cost of the purchased model. 

Further, 4-Max Models reserves the right to modify this warranty without notice. 4-Max Models 
has no control over the final stages of assembly or the materials/glue used for the final 
assembly.  

 

By the act of using the final product the user accepts all resulting liability.  
4-Max Models, as an R/C supplier provides a top-quality model and instructions to complete 
the model. The quality and flight characteristics of the finished model will depend greatly on 

how it is built. We cannot guarantee the performance for the completed model and 
representations are expressed or implied as to the performance of the completed model.  

If the buyer is not prepared to accept the liability associated with the use of this product, the 
buyer is advised to return this kit immediately, in new and unused condition for a full refund. 

 

Safety in Assembly  

During assembly of this airplane, you will need to use sharp knives and glues. Please follow all 
safety procedures recommended by the manufacturers of the products you use, and always 

follow these important guidelines: ALWAYS protect yourself when working with adhesives, 
knives, or tools. Safety glasses are advised to protect your eyes.  

 

Safety in Flying  

This is NOT a toy! It is a high

-

performance R/C model capable of high speeds and extreme 

manoeuvres. It should only be operated by a competent R/C pilot in a safe area with proper 

supervision. ONLY fly your airplane in a safe, open area, away from spectators and vehicles–
and where it is legal to fly. Never run your motor inside a house or building with the propeller 

attached – Remove the prop for safety. Never run the motor on the ground at full or near full 
throttle for more than 20 seconds. We recommend you get insurance from the BMFA. 

 

Required Items  

 

Brushless Motor  

Recommended 4-Max PO-3547-800 

 

Brushless ESC  

Recommended 4-Max 4M-ESC50A 

 

Propeller  

Recommended 4-Max JXF 13x6 

 

4x Servo  

Recommended Emax ES3001 

 

Servo Extension Leads  

4x 200mm, 2 x100mm  

 

Spinner  

Recommended 4-Max 57mm cooling spinner 

 

Foam Safe Glue  

Recommended Deluxe Materials Foam 2 Foam 

 

Transmitter and Receiver  

Minimum 4 channel, 6 is recommended 

 

LiPo Battery  

4S, 3700mAh LiPo Minimum 40C, 60C Recommended 

 

Suitable LiPo charger  

MUST be LiPo compatible 

 

Sharp knife  

 

Set Metric Allen wrenches  

 

Scissors  

 

Small pliers 

 

Wire cutters 

 

Petroleum jelly 

 
All of these items are available from www.4-max.co.uk 

Summary of Contents for Inspiration F3A 50E










Reviews: