PRODUCT OVERVIEW
The Binswitch Elite sensor detects level or plug situations for bulk granular solids or liquids in tanks, bins,
or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs. The sensor
is fully encapsulated in a 30 mm diameter nylon body that is corrosion and abrasion resistant, dust-tight
and waterproof. The Binswitch Elite operates by detecting capacitance change when material is present.
A user selectable relay output can be magnetically calibrated to be normally energized or de-energized,
and during calibration the sensor automatically compensates for material build up, shields or attached
metal probes.
WARNING
Always lockout and tagout machinery prior to installation
PAGE 6
SPECIFICATIONS
Model Power Supply -
BSE1V10C - 24 to 240 VAC or 12 to 240 VDC
BSE2V10C - 24 to 240 VAC/VDC (universal supply)
Operating Temperature - -13°F (-25°C) to 158°F (70°C)
Sensing Range -
1 inch (25 mm) maximum
Output Modes -
BSE1V10C - Energized: output on (N/O and common contacts closed)
De-energized: output off (N/C and common contacts closed)
BSE2V10C - Energized: output on (5.2V drop maximum)
De-energized: output off (< 1mA leakage maximum)
Output -
BSE1V10C - Relay rated 240 VAC 3A maximum
BSE2V10C - FET rated 200 mA maximum
Calibration Controls -
1. Sensitivity control screw (bin must be empty when calibrating)
2. Magnetic calibration point (bin must be empty when calibrating)
Red LED Indication -
On - normally energized (see sensor calibration for details)
Cable -
BSE1V10C - 6 ft. (2 m) 5 wire
BSE2V10C - 6 ft. (2 m) 2 wire
Enclosure -
Nylon
Protection -
IP65
Approvals -
CSA Class II Division 1 Groups E, F and G (USA & Canada)
ATEX & CE Versions Available (Europe)
DIMENSIONS
6-1/8 in. (155 mm)
1-3/16 in.
(30 mm)
M30 x 1.5 x 10 mm Threads
6 ft. (2 m) Cable
6.2 mm Overall Jacket Diameter
LED
Sensitivity
Control
Screw
Magnetic
Calibration
Point
Summary of Contents for Binswitch Elite BSE1V10C
Page 2: ......
