PRODUCT OVERVIEW
This Binswitch Elite version provides a pulsed output proportional to measured capacitance for detection
of bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in
chutes, conveyors and elevator legs. The sensor is fully encapsulated in a 30 mm diameter nylon body
that is corrosion and abrasion resistant, dust-tight and waterproof. The Binswitch Elite BP3 operates by
detecting capacitance change when material is present. Please see Sensor Operation and Calbiration
section for more details.
WARNING
Always lockout and tagout machinery prior to installation
PAGE 5
SPECIFICATIONS
Model Power Supply -
24 VDC Only
Operating Temperature - -15°C (5°F) to +50°C (122°F)
Sensing Range -
25 mm (1 inch) maximum
Output Modes -
BSE12V10AI/x/BP3: Pulsed Output
Output -
BSE12V10AI/BP3 - FET rated 100 mA maximum
Calibration Controls -
1. Zero offset calibration
Blue LED Indication -
On - normally energized (see sensor calibration for details)
Cable -
BSE12V10AI/BP3 - 3 m 3 wire
BSE12V10AI/5/BP3 (5 m) 3 wire
Enclosure -
GRILON POLYAMIDE
Protection -
IP66
