8
UP
RADIO SET
FORCE
UP
RADIO SET
FORCE
For using the operator the first time, it is necessary to set the direction of
operation.
1. Connect power supply, both “UP” and “DOWN” LEDs are on.
3. Press “RADIO SET” button to confirm setting. The “OK” LED is on with 2 beeps.
2. Initialize the operational direction by pressing “UP” or “DOWN” button for the
correct direction setting according to the illustrations below. The correspond-
ing LED is on upon key input.
Caution : Make sure the drive unit is set for the correct side of installation!
To reset installation direction,
press the “LIMIT” button constantly
until both “UP”
and “DOWN” LEDs are ON, repeat steps 2 and 3 to set the appropriate direction.
x2
Indoor view
Indoor view
S
ETTING
D
IRECTION OF
O
PERATION
UP
RADIO SET
FORCE
