9
1.
Obstruction force adjustment
The minimum force displayed IS “1” and it can be adjusted upward.
Display “5” meansIS the maximum force . “3” Is the factory set default
which is equivalent to 150N
2.
Travel speed adjustment
If “8” appears on the display it means 80% of the maximum travel speed.
Display “A” means the maximum speed of 160 mm/s.
3.
Reversal height adjustment
If“0” appears on the display it means the door will rebound to the
fully open position. Display “1~9” means the door will rebound to
corresponding fraction of whole travel. One tenth to Nine tenth of the
whole travel etc.
4.
Partial open/height
If “0” appears on the display it means that the partial open function is
disabled. Display“1~9” means the partial open position is set to a fraction
of whole travel.
5.
Transmitter buttons can be coded individualy or grouped to a
common code
If“0” appears on the display it means that the grouped buttons
recognition function is disabled. Each transmitter button is coded
individualy. Display“1”means the grouped buttons recognition function
is enabled. Each transmitter button is now grouped to a common code.
6.
Codes memory quantity
If “A” appears on the display it means the maximal code memory quantity
is 50. Press the UP/DOWN buttons once, to increase or decrease the
quantity. The code memory quantity is set on 5pcs*N, N=1~9. (The
quantity is the multiple of 5).
7.
Maintenance alarm
If “b” appears on the display and the led light flashes 10 times quickly it means
the garage door and motor are outside of normal safe operating limits. Use
the door in manual released mode and contact your service agent.
8.
Automatic safety reverse
Automatic stop with automatic reverse are basic safety features that
must be correctly configured by the installer. They cannot be relied on
for safe unattended operation around children, pets or other goods.
9.
Soft start / Soft stop
Ramping speed up and down at the start and end of each cycle
reduces stress on the door and opener for longer life, and makes for
quieter operations.
10.
Auto-Close
Auto- Close by time out automatically closes the door upon entering or
exiting the garage. This mode has associated safety and property risks
and must not be enabled without the use of a P.E beam .
PRODUCT DESCRIPTION & FEATURES
Summary of Contents for 4DS2 v1
Page 1: ...Installation instructions and user guide Sectional and Tilting door operator 4DS2 v1...
Page 2: ......
Page 4: ......
