GPS
Figure 6
Figure 5
Figure 7
11.6 Star search status (In GPS mode by default)
The remote control is in GPS mode and the GPS light is always on, which means that the
GPS is in the state of star searching. When the red tail light of the aircraft flashes quickly, it
means that the star searching succeeded, and the remote controller will emit a beep. The
aircraft can be unlocked at this time (Figure 5).
Note: You need to wait at least a few minutes for the first search. When the search
signal reaches 3 blocks or more, you can take off.
Description of remote
control indicator:
One-key
return
Headless
mode
11.7 Start/stop (GPS mode)
Push the left and right joysticks on the remote control outward to unlock, (if the star search
is unsuccessful, it cannot be unlocked and started) (Figure 6). At this time, the aircraft can
take off normally. After taking off, all the indicators of the aircraft are always on.
APP operation: Click "One Key Unlock" icon (Figure 7) in APP control interface, the
one-key unlock function can also be achieved.
11.8 One-key take-off and landing
When unlocking is complete, gently press the “One Key Takeoff/Landing” key on the
remote control (Figure 8), the aircraft will automatically rise to a height of about 1 meter to
maintain a stable flight; when you press this function key gently again, the aircraft will
automatically land slowly.
APP operation: Click "one-key take-off" icon (Figure 9) in APP control interface, the
one-key take-off function can also be achieved; during flight, click this icon again, the
aircraft will automatically land slowly.
09