background image

Warning

Figure 10

Figure 11

Figure 9

Figure 12

12.10 Start / stop (common mode needs to be turned on for indoor operation)

1. Press and hold this button 

on the remote control, the 

remote control will emit a 

sound of beep, the 

fuselage light will be 

always on and enter the 

normal mode (Figure 9).

2. Push the left and right 

joysticks on the remote 
control outward to 
unlock (Figure 10).

3. Then push up the left 

joysticks (Figure 11).

4. Or press one key take 

off button       to take 
off (Figure 12).

Before the aircraft takes off, please operate following the steps in the above sequence: code-matching (refer to 

12.1) → link WIFI (refer to 12.2) → start code-matching with remote control(refer to 12.3) → horizontal 

calibration (refer to 12.4) → geomagnetic calibration (refer to 12.5) ) → Star Search Status (Refer to 12.6) → 

Start / Stop (GPS Mode) → (Refer to 12.7) One-key Takeoff and Landing → (Refer to 12.8) Normal mode 

(Optical flow positioning) (Refer to 12.9) → Start / stop (the normal mode needs to be turned on for the indoor 

operation) (refer to 12.10).

13. Control method:

APP operation: Enter the APP control interface, and click the "joystick on / off" icon; the operation joystick will 

be seen on the interface and the operation method is as follows:

08

When the left joystick (throttle) is pushed 

up, the rotation rate of the main blade 

increases and the aircraft rises.

When the left joystick (throttle) is pushed 

down, the rotation rate of the main blade 

slows down and the aircraft descends.

When the left joystick (rudder) is 

pushed to the left, the aircraft nose 

turns to the left. When the left joystick 

(rudder) is pushed to the right and the 

nose of the aircraft will turn to the right.

When the right joystick (rudder) is pushed 

up, the aircraft moves forward.

When the right joystick (rudder) is pushed 

down, the aircraft moves backward.

When the right joystick (rudder) is 

pushed to the right, the aircraft fuselage 

deviates to the right.

When the right joystick (rudder) is 

pushed to the left, the aircraft fuselage 

deviates to the left.

Summary of Contents for 4D-M1













Reviews: