background image

Warning

1. The packaging and instructions contain important information and should be kept.

2. With this aircraft, you are responsible for ensuring that no harm will be caused to the personal and 

property of others.

3. Commissioning and installing of aircraft must be strictly in accordance with the operating 

instructions, and attention shall be paid to the distance between the aircraft and the user or other 

people shall be 2 to 3m to prevent the aircraft from bumping into the head, face and body of people 

and causing injury in flying and landing, etc.

4. Our company and distributors are not responsible for any loss and damage, as well as injury to 

people caused by improper use or operation.

5. Children should be guided by adults when operating the aircraft. This product is prohibited to be 

operated by children under 14 years old.

6. Please follow the instructions or packaging instructions to install and use correctly, and some parts 

should be assembled by adults.

7. The product contains small parts, please place it out of the reach of children to prevent the risk of 

accidental eating or suffocation.

8. It is strictly forbidden to play on the road or in the place where water is accumulated to avoid 

accidents.

9. Please put away the packing materials in time to avoid harm to children.

10. Do not disassemble or modify the aircraft. Disassembly or modification may cause malfunction to 

the aircraft.

11. The charging cable needs to be inserted into the designated power supply 5V     2A that is the same 

as the product label.

12. The use of other charging cables will cause damage to the battery and may cause unexpected 

dangers.

13. The charging cable is not a toy.

14. When charging the rechargeable battery, it must be under the supervision of an adult. When 

charging, it must be far away from flammable materials. During charging, the guardian should not 

leave the monitoring range.

15. Please do not short circuit or squeeze the battery to avoid explosion.

16. Do not mix different types of lithium batteries.

17. The aircraft uses a rechargeable lithium battery, which needs to be pulled out for charging.

18. Do not short-circuit, decompose or throw the battery into fire; do not put the battery in a place with 

high temperature and heat (such as in fire or near electric heating device).

19. The aircraft should be used as far away from other electrical equipment and magnetic objects as 

possible, they may cause mutual interference.

20. Please keep a safe distance from the high-speed rotating propeller to avoid the risk of scalp or cut

21. The motor is a hot part; please do not touch it to avoid burns.

22. LED has laser radiation; please do not give direct light beam to others.

23. Do not use the model near your ears! Misuse may cause hearing damage.

24. The USB charging cable must use the data cable provided by our company to charge the battery, 

otherwise it will cause serious damage to the battery and will lead to unexpected danger.

25. To meet the magnetic environment requirements of aeronautical radio stations. During the radio 

control order issued by the relevant state departments, the model remote control should be stopped 

within the city area as required.

26. Turn off the switch and unplug the battery when the battery of the aircraft is used up, and charge 

after 30 minutes of rest, otherwise the battery will be easily damaged.

01

Summary of Contents for 4D-V30

















Reviews: