November 2022
6022221B - Direct Drive HVLS Fan UM
25
Installation
6. Fasten the clamps using the supplied 1/2”
dia. X 21/2” screws, lock nuts, and washers.
7.
Torque to 44-48 ft-lbs. See
Figure 7.
LAMINATED WOOD BEAM MOUNTING
(OPTIONAL KIT 6018028)
1.
Attach the laminated wood beam brackets to
the wooden beam using a minimum of four
1/2” dia. grade 5 thru bolts and the
self-locking nuts (not supplied),
2.
Ensure the brackets are square to the
bottom of the beam.
3. Attach the mount assembly to the laminated
wood beam brackets using the supplied 1/2”
dia. x 2-1/2” screws, nylock lock nuts, and
washers.
4.
Torque to 44-48 ft-lbs. See
Figure 8
.
TRUSS MOUNT
1. To span two trusses or purlins with a gap of
96” or less, span the gap using two 4” X 4”
steel angle iron. See
Figure 9
.
Do not span gaps longer than 96”.
Figure 8
Laminated wood
beam bracket
Laminated wood beam
Figure 9
TOC