50
6022221B - Direct Drive HVLS Fan UM
November 2022
Operating Instructions
Before operating the industrial fan, read and
follow the
Safety Practices, Warnings and
Operating Instructions
in this manual. Use by
untrained personnel could result in death or
serious injury.
VERIFY PRIOR TO OPERATION
Before operating the fan, verify the following:
z
The voltage and phase are correct
z
The clearance from obstructions matches the
requirements
z
All safety cables are present and properly
installed
z
All fasteners are properly torqued
z
No personnel are in the movement area
LOGIN SCREEN
If the passcode has been enabled, you must login
before operating the fan.
START THE FAN
If you have enabled using a passcode, you must
log in before operating the fan.
The default passcode is 1111.
NORMAL FAN OPERATION
1. Verify communication status in the bottom
right-hand corner is green.
If it is not, communications is not working
properly.
Figure 37
TOC