Extension Slots and Ports
●
Three Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either
straight or cross-over cables for connecting to other network devices. The first Ethernet port accepts 10..28 V DC
powering from a passive PoE injector. The other two Ethernet ports
do not
support PoE powering.
●
Three MiniPCI Type IIIA/IIIB ports with 3.3V power signaling.
●
DB9 RS232C asynchronous serial port.
●
microSD card slot for storage expansion (only on RB433AH)
Buttons
●
ROS reset hole. While booting, and holding a metal object in this hole (so that it's metal sides short-circuit) will
cause RouterOS software to be reset to defaults
●
BIOS Loader backup button. Holding the button while booting will cause the backup bootloader to be used.
Operating System Support
Currently tested operating system is MikroTik RouterOS (starting from version 3.4).
Copyright and Warranty Information
Copyright and Trademarks
. Copyright 2004-2008 MikroTikls SIA. This manual contains information protected by copyright
law. No part of it may be reproduced or transmitted in any form without prior written permission from the copyright holder.
RouterBOARD, RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All trademarks and registered
trademarks appearing in this manual are the property of their respective holders.
Hardware
. MikroTikls SIA warrants all RouterBOARD series equipment for the term of one year from the shipping date to be
free of defects in materials and workmanship under normal use and service, except in case of damage caused by
mechanical, electrical or other accidental or intended damages caused by improper use or due to wind, rain, fire or other
acts of nature.
If you have purchased your product from a MikroTik Reseller, please contact the Reseller company regarding all warranty
and repair issues, the following instructions apply
ONLY
if you purchased your equipment directly from MikroTik Latvia
To return failed unit or units to MikroTikls you must perform the following RMA (Return Material Authorization) procedure.
Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the RMA process. Take into
account that all goods have one year warranty.
Manual
. This manual is provided “as is” without a warranty of any kind, expressed or implied, including, but not limited to,
the implied warranty of merchantability and fitness for a particular purpose. The manufacturer has made every effort to
ensure the accuracy of the contents of this manual, however, it is possible that it may contain technical inaccuracies,
typographical or other errors. No liability is assumed for any inaccuracy found in this publication, nor for direct or indirect,
incidental, consequential or other damages that may result from such an inaccuracy, including, but not limited to, loss of
data or profits.
rev. A (23-May-2008)
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
