© 2008 4IPNET, INC.
12
4ipnet EAP100 User’s Manual
3.3
Basic Configuration
4ipnet EAP100 supports web-based configuration. Upon the completion of hardware installation, EAP100 can be
configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and the
above.
The default values of LAN IP address and subnet mask of EAP100 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
•
To access the web management interface, connect the administrator PC to the LAN1 or LAN2 port of EAP100 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP100 in TCP/IP of your PC, such
as the following example (Please note that the IP address used shall not be duplicated with the IP address of other
devices within the same network.):
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
•
Launch the web browser on your PC by entering the IP address of EAP100 (
http://192.168.1.1
) at the address field,
and then press
Enter
. The following Administrator Login Page will then appear. Enter
“admin”
for both the
User
name
and
Password
fields, and then click
OK
to log in.
User name:
“admin”
Password:
“admin”
