Quick Installation Guide
EAP757 Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
4
Getting Started
4ipnet EAP757 supports web-based configuration. When hardware installation is complete, EAP757 can be
configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0
and above.
The default values of LAN IP address and subnet mask of EAP757 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the Web Management Interface, connect the administrator PC to the Uplink port of EAP757 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP757 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP757 (
https://192.168.1.1
) in the
address field, and then press
Enter
.
Example of entering EAP757's default IP Address via a web browser
3. The following Admin Login Page will appear. Enter
“admin”
for both the
Username
and
Password
fields,
and then click
Login
.
