Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
Quick Installation Guide
HSG1250
HSG1250
HSG1250
HSG1250
Wireless Hotspot Gateway
ENGLISH
⑧
Common Settings
< Setup Wizard >
HSG1250 provides a
Setup Wizard
for quick
configuration. To quickly configure HSG1250 by
using the
Setup Wizard
, click
on the
Setup Wizard
button to start the configuration process.
Step 1: General
•
Enter a new password in the
New Password
field, and re-enter it again in the
Verify
Password
field (a maximum of 20 characters
and no spaces allowed in between).
•
Select an appropriate time zone from the
Time
Zone
drop-down list box to set up the system
time.
•
Click
Next
to continue.
For security concern, it is strongly
recommended to change the
administrator's password
Step 2: WAN1 Interface
For setting up both wired WAN and wireless LAN
functions:
•
Select a proper type of Internet connection for
WAN1 interface from the following three
available connections:
Static
,
Dynamic
, or
PPPoE
. Your ISP or network administrator can
advise on the connection type available to you.
Below depicts an example for
Dynamic
.
•
Click
Next
to continue.
Step 3: Local User Account (Optional)
New local accounts can be created and added into
the database via this optional function. If local user
accounts are not required, click
Skip
to go directly to
Step 4
. However, It is recommended to create at
least one local user account in order to verify the
system‘s readiness upon completion of this
Setup
Wizard
.
•
Enter the
Username
(e.g.
“testuser
) and
Password
(e.g.
“testuser”
) to create a new local
account.
•
Click
Next
to continue.
•
More local accounts can be added by clicking the
Back
button in
Step 4
.
