4IPNET HSG1250 Quick Installation Manual Download

Page: 5 / 12

Quick Installation Guide

HSG1250

Wireless Hotspot Gateway

ENGLISH

③

description.

WAN1/ WAN2:

Two WAN port (10/100/1000 Base-T RJ-45) uplinks to the external network, such as the

ADSL Router from your ISP (Internet Service Provider).

LAN1 ~ LAN8:

Client machines or switch connect to HSG1250 via LAN ports (10/100/1000 Base-T

RJ-45).

USB:

Function Reserved for future use.

Console:

The system can be configured via a serial console port. The administrator can use a terminal

emulation program such as Microsoft’s Hyper Terminal to login to the configuration console interface to

change admin password or monitor system status, etc.

Rear Panel

Power Supply Socket:

Connect the power cord to the power socket (Input: DC+12V).

Device cooling fans:

For heat dissipation. Please do not block the ventilation openings.

Summary of Contents for HSG1250













Search results

Summary of Contents for HSG1250

Reviews:

Related manuals for HSG1250

Brands by name

Popular brands

4IPNET HSG1250, Quick Installation Manual

Search results

Summary of Contents for HSG1250

Reviews:

Related manuals for HSG1250

Brands by name

Popular brands