Quick Installation Guide
HSG200 802.11n/b/g Hotspot Gateway ENGLISH
16
Deployment Example
< Small Hotspot Network Environment >
Nowadays, wireless network service is common and popular in a hotspot network
environment. HSG200 provides wireless network service with authentication required for
clients in Public Zone. Wireless clients in the Public Zone and Private Zone are isolated
from other wireless clients within the same zone when
Station Isolation
feature is
enabled. Using wireless instead of wired service helps hotspot owners to build network
service quickly.
HSG200 supports two zones,
Private
and
Public
. In the
Private Zone
, authentication is
not required to access the network via wired and wireless. Administrator can access the
Web Management Interface (WMI) of HSG200 through the wired LAN port. Waiters or
waitresses can send orders back to the electrical menu system via wireless hand set
devices. In
Public Zone
, by default,
Authentication Required
is enabled, so wired and
wireless clients in Public Zone are required to get authenticated successfully before
surfing the Internet.
The switches deployed under HSG200 must be Layer 2 switches only.
Configuration Steps:
Step 1: Configure Wireless Band for the Wireless interface
h
Click
Main Menu
in the homepage. Click the
System
menu, then
Zone
Configuration
tab.
h
Select a desired wireless band from
Band
drop-down list.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
