background image

User’s Manual 

HSG Wireless Hotspot Gateway ENGLISH

   

 

 

26 

Fragment Threshold:

 Enter a value between 256 and 2346. The default value is 2346. Packet 

size larger than this threshold, will be fragmented (sent with several pieces instead of one chunk) 

before transmission. A smaller value results in smaller frames but allows a larger number of 

frames in transmission. A lower Fragment Threshold setting can be useful in areas where 

communication is poor or disturbed by a serious amount of radio interference. 

Broadcast SSID:

 The administrator has the option of enabling or disabling the SSID for VAP1 

which is the Private Zone. Default value is set at Disable where users will not be able to scan for 

the SSID.   

Station Isolation:

 By enabling this function, all stations wirelessly associated to this zone are 

isolated from one another and can only communicate with the system.  

WMM:

 The default is 

Enable.

 Wi-Fi Multimedia (WMM) is a Quality of Service (QoS) feature that 

prioritizes wireless data packets based on four access categories: voice, video, best effort, and 

background. Applications without WMM and applications that do not require QoS are assigned to 

the best-effort category, which receives a lower priority than that of voice and video. Therefore, 

WMM decides which data streams are more important and assigns them a higher traffic priority. 

This option works with WMM-capable clients only. 

IGMP Snooping: 

IGMP is a multicast constraining mechanism which may flood the broadcast 

domain. This is effective for dense internet usage such as conventions or campuses.     

 

 

Normally, we use VAP2, the VAP under Public Zone, to provide wireless service to public clients in a hotspot 

environment. Service Zones 2 and 3 may be enabled to support VAP3 and VAP4. To configure the Public Zones

’ 

Wireless Settings, go to: 

System >> Service Zones

, click 

Configure

 for each respective zone. 

 

 

Wireless Settings: VAP2 (Wireless Settings for Public Zone) 

 

Basic: 

Enable the VAP Status if you wish to provide wireless service under this zone. Assign an 

ESSID for VAP2 under Public Zone or use default, the ESSID of Public Zone will be broadcasted 

in default settings to allow it to be scanned in the air.

 

 

Security: 

Configure the wireless network under Public Zone with security encryption to prevent 

Summary of Contents for HSG260



































































































































































































Reviews: