Copyright © 4IPNET, INC. All rights reserved.
5
Handbook
OWL550 Enterprise Access Point
Pole mount
1. Insert the metal strips through the pole mounting gap.
2. Join the two ends of the metal strips and adjust the length for tight fitting around the pole.
2. Connect the OWL550 to your network device.
Connect one end of the Ethernet cable to the LAN1 (PoE) port of OWL550 and the other end of the cable to a
switch, a router, or a hub. OWL550 is then connected to your existing wired LAN network.
3. Power on the OWL550.
OWL550 LAN1 (PoE) port is capable of receiving DC currents. Connect an IEEE 802.3at-compliant PSE
device (e.g. a PoE-switch) to the LAN1 (PoE) port of OWL550 with the Ethernet cable.
Now, the Hardware Installation is complete.
To verify the wired connection between OWL550 and your switch / router / hub, please also
check the LED indicator of the respective network devices.
ENGLISH
