114
User Manual ENGLISH
WHG-Series Wireless WLAN Controller
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
13
Port Location Mapping
The Port Location Mapping feature allows each Service Zone to own multiple VLANs (as if each VLAN is a
port) in order to identify where the clients are coming from. Administrator could use Port Location
Mapping feature to map a location (such as a hotel room) to a VLAN port of VLAN switch or a DSLAM
device. Each Room is mapped to a VLAN Tag. And each Room can be assign to different Service Zone to
get different policy. Furthermore, according to your application, you can configure the different rooms to
different Port Type: Open, Block, or Auth. Required.
Open: this port type means the user can access internet in this room without any charge.
Block: If you do not want to provide any internet access right in the rooms, you may change the Port type
of the rooms to Block. If the user opens a browser and tries to access internet, it will pop up a Blocking
message to notify the user.
Auth. Required: this port type is used mainly for hospitality application to charge users. When the user
opens a browser and tries to access internet, a page with disclaimer and billing plan options will be
displayed. The user can select the desired plan and click confirm button to purchase an account. The
account cost will be sent to the PMS and added to the hotel bill via the configured middleware.
Create Single Mapping
Port Type: The default state of the rooms, it may be: Open, Block, Auth. Required.
Choose LAN Port: Select the LAN Port for which traffic is received
Service Zone: The service zone profile used to provide internet service to the corresponding location.
DHCP Scope: Select which DHCP Scope to use from corresponding Service Zone.
Assign VLAN ID: The starting VLAN ID.
Location ID: A numeric identification number (or typically the room number).
Location Description: Optional description for reference.
User Limit: Maximum number of users in batch on corresponding port
NAS Identifier:
An optional parameter for RADIUS attribute.
Class:
An optional parameter for RADIUS attribute.
HTTP Parameter:
Used only when an External Login Page is configured and additional HTTP parameters
are required.
Create Multiple Mappings
Port Type: The default state of the rooms, it may be: Free, Block, Single User, Multiple User.
Choose LAN Port: Select the LAN Port for which traffic is received
Service Zone: The service zone profile used to provide internet service to the corresponding location.
DHCP Scope: Select which DHCP Scope to use from corresponding Service Zone.
Assign VLAN ID From: The starting VLAN ID.
Number of VLAN: The total number of VLAN.
Location ID: A numeric identification number (or typically the room number).
Location ID Prefix: The prefix (of room number).
Location ID Postfix: The postfix (of room number).