38
User Manual ENGLISH
WHG-Series Wireless WLAN Controller
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
time. To Batch-create tickets, turn to
“Main Menu > Users > Authentication > On-Demand User Server
Configuration > On-Demand Account Batch Creation”
on WLAN controller’s WMI.
Use FUNC + ENTER or wait 5 seconds to clear the wrong number just pressed.
Setting Up SDS200W with the WLAN controller
SDS200W offers manual and automatic connection to uplink WLAN controller. The former requires the
administrator to go on to SDS200W’s WMI to enter necessary columns that are supposed to fit what is set
up on the controller end. However, the auto connection – called Terminal Auto Setup (TAS) – is particularly
designed to establish a quick connection without previous setting.
Manual setup
To connect SDS200W manually to a WLAN controller, connect the SDS200W to the WLAN controller via an
Ethernet cable. Enter the Network Settings and make sure they match what is determined on the
controller. The change will take effect after (1) clicking Save and (2) rebooting the system. After SDS200W
and the uplink device has built a successful connection, the Status indicator will blink with long illuminated
intervals.
The recommended step-by-step setup process is shown as follows.
Note:
When wired connection is established, the wireless connectivity will be turned off by the system
automatically, meaning wireless and wired connection will not co-exist at any time. Wired connection has
a higher priority.