1 Spa operation
1.1
Hydro-massage Pump
This Spa has 1 pump (two speed) enabling you to select the preferred intensity of hydro-massage. This pump is connected and operated through
the display (Fig.1).
• Press on the buttons to activate the pump at low speed.
• Press the same button a second time to turn to high speed.
• Pressing the same button a third time turns the Pump off.
A built-in timer automatically turns off the Pump after 20 minutes.
For spa’s without circulation pumps only: if the pump is running automatically at low speed or remains running on low speed then the heating and/or fi ltration
cycle is operating and the pump will continue until the water has reached the desired temperature and/or the fi lter cycle is fi nished.
1.2
Lighting
• Press the to turn light on.
• Press a second time (within 4 seconds) to switch to a different color.
• Press a third time (within 4 seconds) to continue changing the color or alter the lighting sequence.
A built-in timer automatically turns off the light after 2 hours.
1.3
Blower (where fi tted)
When your spa has a blower you can start it the following way:
• Press the to turn blower on.
• Press a second time to stop the blower.
A built-in timer automatically turns off the Blower after 20 minutes.
1 Spa Operation
4
