Figure 3.A
Figure 3B
To change the voltage setting proceed as follows:
1. Open fuse holder compartment with a screwdriver, figure 3A.
2. With the screwdriver lever out the fuse holder, figure 3B.
3. Replace the two fuses according to the table below:
Power Voltage
(EN 60127)
115v
3.15A (T)
230v
2A (T)
Table
4. Insert the fuse holder keeping the set voltage label at the top.
5. Close the fuse compartment by pressing gently.
6. If the fuse holder is inserted correctly you can read the voltage selected.
9
