Receiver Component Replacement
• To open control box unscrew 4
screws and carefully lift the lid.
Figure 7.
Figure 8.
Figure 9.
Receiver
component
• Gently lift out old Receiver Component (do not pull out by the wiring)
and unplug. Insert replacement Receiver component.
Control box
Battery Replacement
CAUTION:
• Keep battery out of reach of children.
• If a child swallows a battery seek medical advise immediately.
• Do not use any metallic devices to install battery - this may cause a short circuit.
• To open remote hand control unscrew 4
screws and carefully pull apart the two halves.
Battery
Figure 1.
Figure 2.
Figure 3.
Remote hand
control
• To access the battery, pull off the IN/OUT toggle switch assembly
which is inserted into the 6 recesses on the circuit board. Bend the
front of the printed panel forward. Once the battery is replaced
(ensuring the polarity orientation is correct.ie: Match + to +),
put back the IN/OUT toggle switch assembly and reassemble the
hand control.
PLEASE CONTACT THE AFTER SALES SUPPORT TEAM IF REPLACEMENT PARTS ARE REQUIRED.
14
The hand control is supplied with a Alkaline 23A 12V battery within the hand control and a spare battery if
it requires changing.
