TYRE DEFLATOR - Instructions
6. Remove the unit by turning the valve
stem adaptor in an anticlockwise direction.
Ensure a valve cap is placed on the stem to
prevent ingress of debris.
5. When the desired pressure is reached,
push the valve core remover in and turn
clockwise until the valve seats firmly.
Note: Do not over tighten the valve core.
1. With the slide valve pushed
forward, thread the valve stem
adaptor on to the valve stem in a
clockwise direction.
2. Push the valve core remover forward
until it engages the valve and turn
anti-clockwise to remove valve.
4. Pull out on the slide valve to
release air. Push in on the slide
valve to stop air and check the
pressure. Note, gauge will not show
correct pressure whilst deflating.
3. When the valve core is removed it
will push the core remover out and the
gauge will read the tyre pressure.
10
Summary of Contents for 150L
Page 11: ...NOTES 11 ...
