6
IMPORTANT SAFETY INFORMATION
•
DO NOT
allow the unit to become wet.
•
DO NOT
use the unit in an explosive environment (e.g. the presence of flammable
liquid or gases).
•
DO NOT
dismantle the unit, there are no user-serviceable parts inside.
•
DO NOT
use the unit if it appears damaged in any way.
•
DO NOT
use this unit for any other purpose other than that for which it is designed.
•
DO NOT
allow children to play with this unit.
• Ensure your vehicle is in a well ventilated area.
• Apply the hand brake and select neutral or park before attempting to start the vehicle.
• Ensure that the ignition and all ancillary electrical equipment are switched off before
attaching the unit to the battery.
• T
ake care to ensure correct connection polarity.
The
RED
clamp to positive, the
BLACK
clamp to negative.
After the Jump Starter has been fully charged and the Bypass Mode is active, the
battery clamps MUST NOT touch each other. Failure to observe this precaution
will cause the unit to short circuit, damaging the Jump Starter and voiding
product warranty. Once the Bypass Mode has been deactivated , the battery
clamps are able to touch.
INBUILT PROTECTION FEATURES
• If the polarity is accidentally reversed when reconnecting to a disabled battery, the
Fault / Override indicator Light, (B) will turn red and an alarm will sound.
• If the battery from which a charge is to be obtained has in excess of 15V of charge, the
Fault / Override Indicator Light, (B) will turn red and an alarm will sound. The Jump Starter
will not charge. If this occurs, a charge from an alternative source should be sought.
Read and follow your Jump Starter instructions and safety precautions
before using the Jump Starter!
