Problem
Possible cause
Possible solution
Device does not
work
Plug is not properly plugged in the
wall socket
Put the plug in the wall socket again
Device has no
or very weak
suction power
Dust canister is not properly
assembled
Re-assemble the dust canister
Dust canister is full
Empty the dust canister
One or more filters are clogged up
Clean the filters
Flexible hose or hose outlet is
clogged up
Switch the device o
ff
and take the
plug from the wall socket. Check for
blockages.
blockages
Dust is coming
from the device
Dust canister is not properly
assembled
Re-assemble the dust canister
Flexible hose is not properly
assembled
Assemble the flexible hose in the
hose outlet
Dust canister is full
Empty the dust canister
Power cable
cannot be
pulled out
pulled out
Power cable is entangled
Carefully pull the power cable in and
out a number of times and press the
button to wind up the cable
button to wind up the cable
Power cable is
not fully wound
Power cable is entangled
Carefully pull the power cable out
some length and press the button to
wind up the cable
wind up the cable
TROUBLESHOOTING
Page 12
Summary of Contents for VCC181
Page 14: ......
