aGlass DK
Ⅱ
User
’
s Manual
2017 Beijing 7invensun Technology Co., Ltd All Rights Reserved.
Page 14 of 15
and short-term. The existing research does not ensure that long time infrared radiation has no effect
on human eyes. So,
don’t use the product for too long time and
pay attention to eye health.
10
Troubleshooting
1)
Questions: P
aper user’s manual is not very detailed. Are there any instructions more detailed?
Answers: Click the following link for more instructions:
http://www.aglass.com/assets/aGlass-DKII-Users-Manual-En.pdf.
If you are developer or want to know the API, click the following link:
http://www.aglass.com/assets/aGlass-DKII-Developers-Guide-En.pdf
。
2)
Questions: I cannot install the add-ons onto the HTC Vive Headset.
Answers: Click
http://www.aglass.com/assets/aGlass-DKII-Assembly-Guide-En.mp4
to
watch the video on how to install and disassemble the add-on, and operate by following the
operating procedures shown in the video.
3)
Questions: I cannot calibrate the device as the calibration options in the menu are all gray.
Answers: Check whether the HTC Vive is plugged in and power on.
Check whether the add-on and HTC Vive are connected properly with the USB cable.
4)
Questions: When starting calibration, I received a prompt of OpenVR failure.
Answers: Check whether you have installed and logged on to SteamVR
, and if you haven’t,
please install and log on to SteamVR, to test whether HTC Vive can work normally under
SteamVR.
5)
Questions: When starting calibration, I received a prompt of not finding the USB key.
Answers: Check whether the USB key is normally inserted into the USB interface of the
computer in use, and try pulling out and inserting it again.
6)
Questions: During calibration, there is a point that always fails to pass.
Answers: Pressing grip button of HTC Vive controller or clicking W on the keyboard can force
it to pass, or wait for it to pass automatically after 15 seconds.
7)
Questions: I want to take the add-on off from HTC Vive, but always fail.
Answers: Click
http://www.aglass.com/assets/aGlass-DKII-Assembly-Guide-En.mp4
to
watch the videos on how to install and disassemble the add-on, and operate following the
operating procedures shown in the video.
8)
Questions: Can I wear my glasses or not while using it?
Answers: It is not recommended to wear glasses when using it. We can provide myopic lenses
of 200°, 400° and 600°, and if these cannot meet your demand, you can also order
customized myopic lenses from our company and install them into the add-on.
9)
Questions: What are the precautions for use?
