aGlass DK
Ⅱ
User
’
s Manual
2017 Beijing 7invensun Technology Co., Ltd All Rights Reserved.
Page 15 of 15
Answers: Make sure the HTC Vive power on and connected normally.
Ensure that the aGlass add-on is installed correctly and steady.
Ensure that the nose rest does not influence the installation of the add-on, or cover the
sensor under the add-on.
Ensure that the USB cable is normally connected, to avoid any faulty connection.
Ensure that there is nothing between the eyes and the lenses in the headset.
Ensure that you have normally installed and logged on to SteamVR.
Avoid stamping the HTC Vive cable while using it.
11
Trademarks and copyright
1)
Vive, the Vive logo, HTC, the HTC logo, and all other HTC product and service names are
trademarks and/or registered trademarks of HTC Corporation and its affiliates in the U.S. and
other countries.
2)
Steam, the Steam logo and Steam VR are trademarks and/or registered trademarks of Valve
Corporation in the U.S. and/or other countries.
3)
All other trademarks and service marks mentioned herein, including company names,
product names, service names and logos, are the property of their respective owners and
their use herein does not indicate an affiliation with, association with, or endorsement of or
by HTC Corporation. Not all marks listed necessarily appear in this User Guide.
4)
Screen images contained herein are simulated. 7invensun shall not be liable for technical or
editorial errors or omissions contained herein, nor for incidental or consequential damages
resulting from furnishing this material. The information is provided “as is” without wa
rranty
of any kind and is subject to change without notice. 7invensun also reserves the right to
revise the content of this document at any time without prior notice.
5)
Information is provided on the basis of the “prototype”, without any type of warranty
provided; please be aware that you will not be informed if there is any change. Beijing
7Invensun Technology Co., Ltd. reserves the right to modify the document at any time,
without prior notice.
6)
The copyright of this manual is fully owned by Beijing 7Invensun Technology Co., Ltd.. No
part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording or storing in a retrieval system,
or translated into any language in any form without prior written permission of 7invensun.
