background image

                                                                       

64

           

User Manual v1.3 

 

3.4.3 QoS 

 
Quality of Service (QoS) refers to the capability of a network to provide better service to 
selected network traffic over various technologies, including Frame Relay, Asynchronous 
Transfer Mode (ATM), Ethernet and 802.1x networks, and IP-routed networks that may use 
any or all of these underlying technologies. The primary goal of QoS is to provide priority 
including dedicated bandwidth, controlled jitter and latency (required by some real-time and 
interactive traffic), and improved loss characteristics. Also important is making sure that 
providing priority for one or more flows does not make other flows fail. QoS technologies 
provide the elemental building blocks that will be used for future business applications in 
campus, WAN and service provider networks. This chapter provides each setting of QoS. 

 

 

 

1.  Enable QoS Service: 

One checkbox appears to activate the QoS control function or 

not. Click it to force the router to perform QoS control over traffic flows. By default, it’s 
enabled.

 

2. 

Current Upstream Bandwidth: 

Allows you to set the upper bound of the port 

forwarding rate. It will be of great value to minimize the impact on other users from one 
user who would otherwise monopolize the network transmission bandwidth (e.g. 
playing games or downloading large files). 

3. 

Priority: 

To limit the bandwidth consumed over a backbone link by FTP transfers or 

give priority to an important database access. And the following applications can be 
selected individually and distribute the priority level. 

4. Application: 

Including FTP, HTTP, E-mail, Telnet, Voice, Games, IM and Video priority 

setting.

 

5. Apply & Cancel  

Click on

 Apply 

button to save the setting. Click on 

Cancel

 button to clear the settings 

on this page. 

 

Summary of Contents for PE-8074











































































































































































Reviews: