table of contents
introduction
2
hardware
4
parts list
5
assembly
6-7
QUESTIONS?
Customers can email service@the7thhaven.com to order missing supplies. For the best service, please include the item sku number.
3
Congratulations on your latest purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
before you begin
1. Customers can email service@the7thhaven.com or call 1-833-784-2836 (1-833-7THAVEN) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
2
A
B
H4
H1
H2
H3
B
assembly tips
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
warning:
1. Don't attempt to repair or modify parts that are broken or defective please contact our service department immediately.
2. This product is for home use only and not intended for commercial establishment.
hardware
4
ITEM DESCRIPTION QUANTITY
A
seat cushion
1
2
5
step 1.
6
(H1)
x 8
bolt (1/4" x 1/2")
(H2)
x 4
bolt (1/4" x 1-1/4")
(H1)
x 8
bolt (1/4" x 1/2")
(H3)
x 1
hex wrench (1/4")
Assemble the bench on soft, scratch-free surface such as a carpet or a rug.
1. Fasten the support bar (C),to right side (B) and left side (B) using bolt (H1) and hex wrench (H3).
C
2
step 2.
7
(H2)
x 4
bolt (1/4" x 1-1/4")
(H3)
x 1
hex wrench (1/4")
Assemble the bench on soft, scratch-free surface such as a carpet or a rug.
1. Attach the legs (B) to bottom of seat cushion (A) using bolts (H2).Securely tighten all bolts with hex wrench (H3).
Additional note about safety: Bolts may loosen during normal everyday use. They should be periodically inspected and
re-tightened to prevent damage or injury. Always check to be sure that all hardware is kept tightened.
H2
B
B
B
B
legs
support bar
B
B
C
C
A
H1
H3
C
C
B
B
(H3)
x 1
hex wrench (1/4")
H3
H2
B
B
A
