5
FEATURES
PRODUCT SPECIFICATIONS
Collet ......................................................................... 1/4 in.
No Load Speed ..........................
.
........
35,000
- 40,00
RPM
Input ............................................... 120 V, 6.5 Amps, 60 Hz
Switch ......................................................................On / Off
OVERMOLDED GRIP AREA
The base grip area is overmolded for improved grip and
comfort.
REMOVABLE BASE
The removable base allows clear access to the spindle.
ON / OFF SWITCH
The switch is located on front of the motor housing for easy
access.
SPINDLE LOCK
A spindle lock secures the spindle so that only one wrench
is needed to loosen the collet nut or SpeedMill™ cutting
tool.
HIGH-SPEED PERFORMANCE
The fixed-speed router has a no-load speed between
35,000 RPM to 40,000 RPM. This allows for rapid and
smooth finishing of your lower receivers.
UNPACKING
This product requires
assembly. Carefully
remove the
tool and any accessories from the
box. Make sure that all
items listed in the packing list are included.
WARNING
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not
properly and completely assembled could result
in serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
KNOW YOUR COMPACT ROUTER
See Figure 1
The safe use of this product requires an understanding
of the information on the product and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
PRECISION GROUND SPINDLE
The router has a custom precision ground spindle
designed for use with the 80 Percent Arms SpeedMill™
cutting tools which significantly reduces run-out and
chatter compared to ordinary routers.
DEPTH SCALE
A convenient inch and millimeter depth scale is located
on the side of the motor housing.
RACK-AND-PINION DEPTH ADJUSTMENT
The smooth rack-and-pinion depth control adjustment
makes for quick and easy depth of cut adjustments.
MOTOR
A powerful 6.5 amp permanent magnet motor has
sufficient power to handle milling 6061 and 7075
aluminum lower receivers.
BASE RELEASE LEVER
The router has a quick release base release lever to
make depth of cut adjustments quick and easy.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
(
949
)
354-2767 for assistance.
PACKING LIST
• Compact Router with Base and Subbase
• Colle
t
Nut Wrench
• Collet
• Collet Nut
• Replacement Carbon Brush
Set
• Operator’s Manual
WARNING
:
This is a high speed router designed to be
used with 80% Arms SpeedMill™ tools only. Do
not use any cutters with this router that are not
rated for use above 35,000 RPM.
WARNING:
Do not attempt to modify this tool or use
accessories not recommended for use with this
tool as this
can
result in possible
property damage
and
serious personal injury.
