4
Enable Bluetooth on your
smartphone or other device.
Step 4: Pair + Connect
If you’ve previously paired your phone or other Bluetooth device with this
speaker, the speaker will automatically attempt to reconnect to that device
when you switch the speaker on. If you want to pair to a new device, give
a short double-press to the
button. The speaker gives a signal and the
indicator light on the front of the speaker starts blinking.
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8:45PM
Make sure the indicator light
on the front of the speaker is
blinking rapidly. (If it isn’t, give
a short double-press on the
button. The speaker gives an
audio signal.)
Choose
808 TLS
from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
The speaker gives an audio signal when it’s finished pairing
and connecting to your smartphone. The indicator light on
the front of the speaker turns solid blue.
Note:
The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s
AUX IN
jack when
you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
• If you’ve paired your device with the speaker before but you’re having trouble
reconnecting when you turn the speaker back on, give a short press to the
button while the indicator light on the front of the speaker is flashing. The speaker
will attempt to connect to a previously paired device.
Step 3: Turn on
Press and hold the
button on
the top of the speaker.
The power-up tone sounds and
the indicator light on the front
of the speaker starts blinking.
After a few seconds, the
speaker goes to Bluetooth
pairing mode to set up with
your smartphone.
Speaker top
Speaker
front
Speaker
front
