150Mbps Wireless ADSL2+ Router
User Manual
47
this rule.
Trigger
Protocol
: The protocol used for Trigger Ports, either TCP, UDP, or All (all protocols
supported by the Router).
Forward
Port
: The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC that triggered
this rule. You can input at most 5 groups of ports (or port sections). Every group of ports must
be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030.
Forward
Protocol
: The protocol used for Incoming Ports Range, either TCP or UDP.
To add a new rule, follow the steps below.
1.
Select a predefined rule from the Predefined Trigger Rules drop-down list, then the Trigger Port
field and the Forward Ports field will be automatically filled. If the Common Applications do
not have the application you need, enter the Trigger Port and the Incoming Ports manually.
2.
Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either TCP
or UDP.
3.
Select the protocol used for Forward Ports from the Forward Protocol drop-down list, either
TCP or UDP.
4.
Click “
Save
” button to save the new rule.
