17
as detailed in the next section, “
Starting the generator
manually
”.
Note,
the battery will charge automatically when
the generator is running.
DO NOT attempt to charge the electric start battery
mounted on the generator with the battery charging
output of the generator.
Starting the engine manually
Note.
Follow steps 1 to 3 of
the ‘
Starting the engine with
key start
’ section.
4. Turn the key start ignition
(12a) clockwise to the ‘ON’
(Fig. I1), or the engine
switch (12b) to ‘ON’ for non
electric start models (Fig.
I2, I3).
5. Slowly pull the recoil starter (23) until you feel it engage
and then pull it briskly.
6. Once you hear the motor operating, move the choke
lever (14) back to the run position (refer point 6 above).
Stopping the engine
1. Before stopping, ensure that no electrical apparatus is
connected to the generator.
2. Turn the key start ignition
(12a) to the ‘OFF’ position
(Fig. J1), or on non electric
start models push the
engine switch (12b) to ‘OFF’
(Fig. J2, J3).
3. Turn the fuel lever anti
clockwise to the ‘off’ position.
Connecting apparatus to the generator
Start the generator and allow the generator to run for
a few minutes to warm up.
240V AC Connection
Check the total rating of the appliance to be connected and
ensure the rating of the appliance/s does not exceed the
rating of the generator.
Where fitted, turn off the AC
circuit breaker (all models
except G1100KU).
Check the appliance to be
connected is turned ‘OFF’.
Insert the 3 pin plug into the
240V outlet socket of the
generator (Fig. K).
J3
J2
K
J1
I1
I3
I2
Summary of Contents for G1100KU
Page 29: ......
