4
SPI & SPP MANUAL
VER. 2 REV. 0
Safety
This manual contains important safety instructions that must be followed during installation, operation, and maintenance of
the product. Review the drawings and illustrations in this manual before proceeding. If you have any questions regarding the
safe installation or operation of this product, please contact 9dot or your nearest 9dot representative. Please keep it in a safe
place for future reference.
To reduce the risk of injury and to ensure continued safe operation of this product, the following terms have been incorporated
into this manual:
ATTENTION
: indicates safety information intended to prevent damage to people, materials or equipment
IMPORTANT NOTE:
additional clarifications on some features, terminology, reminders, etc.
Where they appear, please take more care and attention.
General warnings and precautions
You should read and understand the following warnings before installing the 9dot SPMS and its components. Otherwise, it
could cause personal injury.
•
Read and follow all instructions included in this manual.
•
Don't work alone in dangerous conditions.
•
Only qualified personnel may install, use, and repair this system and its components.
•
Always assume electrical connections or conductors are live. Turn off all switches and recheck connections with a
voltmeter before installation or maintenance.
•
Keep the installation area clean and dust-free during and after installation.
•
Wear safety glasses when working in conditions that can be dangerous to the eyes.
Certifications and compliances
The equipment has been tested in accordance with:
RoHS directive
European standard CE
EMC standard EN 55022 Class B, EN61000-4
Guarantee
To know the guarantee of our products, consult with our nearest distributor. See the “Official Distributors” section of this
document.
